4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
4. Install No.2 one-way clutch.
a. Install the one-way clutch and 2 retainers into the rear planetary gear.
HINT: Make sure that the open ends of the guides on the one-way clutch are faced upward.
b. Using a screwdriver, install the snap ring.
c. While turning counterclockwise, install the one-way clutch inner race to rear planetary gear.
5. Check operation of No.2 one-way clutch.
Hold the planetary gear and turn the one-way clutch inner race. Check that the one-way clutch inner race must be able to turn freely
counterclockwise and locks clockwise.