4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
/Page-1568002.png)
4. Remove oil seal.
Using the SST 09308-10010, remove the oil seal.
5. Remove the oil slinger.
6. Remove front bearing.
Using the SST 09556-22010, remove the front bearing from the drive pinion.
7. Remove the front bearing outer race and the oil storage ring.
a. Using SST 09308-00010, remove the front bearing outer race.
b. Using a screwdriver, bend the oil storage ring and remove it.
8. Remove the bearing spacer.
9. Install a new bearing spacer.
10. Install the oil storage ring and the front bearing outer race.
a. Using the SST 09316-60011 (09316-00011, 0931-00021) and a hammer, install a new oil storage ring.
b. Using the SST 09316-60011 (09316-00011, 09316-00021) and a hammer, install the front bearing outer race.
11. Install the front bearing.
a. Place the front bearing.
b. Place the oil slinger.
