4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
/Page-2534003.png)
Front Wiper/Washer Switch Continuity w/ Intermittent
w/ INTERMITTENT
If continuity is not as specified, replace the switch.
Intermittent Operation
Intermittent Operation
2. INSPECT INTERMITTENT OPERATION
a. Turn the wiper switch to INT position.
b. Turn the intermittent time control switch to FAST position.
c. Connect the positive (+) lead from the battery to terminal 16 and the negative (-) lead to terminal 2.
d. Connect the positive (+) lead from the voltmeter to terminal 7 and the negative (-) lead to terminal 2, check that the meter needle indicates
battery positive voltage.
If operation is not as specified, replace the wiper and washer switch.
