4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
Front Wiper Motor Operation / Low Speed
Low Speed:
Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead from the battery to the motor body, and check that the motor
operates at low speed. If operation is not as specified, replace the motor.
Front Wiper Motor Operation / High Speed
High Speed:
Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead from the battery to the motor body, and check that the motor
operates at high speed. If operation is not as specified, replace the motor.
Stopping at Stop Position:
Front Wiper Motor Operation / Stopping At Stop Position
a. Operate the motor at low speed and stop the motor operation anywhere except at the stop position by disconnecting positive (+) lead from
terminal 2.
Front Wiper Motor Operation / Stopping At Stop Position
b. Connect terminals 2 and 3.
c. Connect the positive (+) lead from the battery to terminal 4 and the negative (-) lead from the battery to the motor body, and check that the
motor stops running at the stop position after the motor operates again.
If operation is not as specified, replace the motor.