Avalon V6-3.0L (1MZ-FE) (1996)
/Page-111001.png)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION SENSOR REMOVAL
1. REMOVE RH FENDER APRON SEAL
2. REMOVE CRANKSHAFT POSITION SENSOR
-
Remove the bolt and remove the crankshaft position sensor.
-
Disconnect the crankshaft position sensor connector.
HINT: Installation is in the reverse order of removal.
Torque: 8 Nm (80 kgf.cm, 69 in.lb)
