Avalon V6-3.5L (2GR-FE) (2006)
/Page-1380004.png)
NETWORK GATEWAY ECU
REPLACEMENT
HINT: Installation is in the reverse order of removal.
1. TABLE OF BOLT, SCREW AND NUT
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
3. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY W/FRONT PASSENGER AIRBAG ASSEMBLY
HINT: Refer to the procedures up to the removal of the instrument panel safety pad sub-assembly w/ front passenger airbag assembly.
