Avalon V6-3.5L (2GR-FE) (2006)
Drink Holders: Technical Service Bulletins
Interior - Cup Holder Replacement Information
T-SB-0150-08
August 2, 2008
Cup Holder Replacement
Service Category
Vehicle Interior
Section
Interior Panels/Trim
Market
USA
Applicability
TSB SUPERSESSION NOTICE
The information contained in this TSB supersedes TSB No. B0003-06.
^
Applicability has been updated to include 2008 model year Avalon vehicles.
TSB No. B0003-06 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before
proceeding.
Introduction
A cup holder sub-assembly is now available for 2005 - 2008 model year Avalon vehicles. This new service part eliminates the need to replace the center
console sub-assembly when only the cup holder requires replacement. The following replacement procedure should be used when replacing the cup
holder sub-assembly.
Parts Information
Warranty Information
APPLICABLE WARRANTY
^
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first,
from the vehicle's in-service date.
^
Warranty application is limited to correction of a problem based upon a customer's specific complaint.
Repair Procedure