Avalon V6-3.5L (2GR-FE) (2006)
4. Using a plastic pry tool remove the reclining power seat switch knob.
5. Remove the front seat cushion shield inner No.
A. Disconnect the 2 clips and the cover.
B. Remove the 5 screws.
C. Disconnect the lumbar front power seat switch connector.
D. Disengage the 2 claws and remove the front seat cushion shield inner No.1 LH and front seat cushion shield LH as a unit.
6. Remove the front seat cushion shield.
7. Remove the front seat cushion shield inner.
A. Remove the screw.