Avalon V6-3.5L (2GR-FE) (2006)
/Page-371001.png)
Variable Valve Timing Actuator: Testing and Inspection
Component Inspection
INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
a. Using an ohmmeter, measure the resistance between the terminals.
Standard: 6.9 to 7.9 Ohms at 20 degree C (68 degree F)
b. Connect the battery's positive (+) lead to terminal 1 and negative (-) lead to terminal 2. Check the movement of the valve.
If operation is not as specified, replace the valve.
