Avalon V6-3.5L (2GR-FE) (2006)
b. Using the pulley set bolt and SST, remove the crankshaft pulley.
SST 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021)
18. REMOVE OIL PAN SUB-ASSEMBLY NO.2
a. Remove the 16 bolts and 2 nuts.
b. Insert the blade of SST between the oil pans. Cut through the applied sealer and remove the oil pan sub-assembly No.2.
SST 09032-00100
NOTICE: Be careful not to damage the contact surfaces of the oil pans.
19. REMOVE OIL STRAINER SUB-ASSEMBLY
a. Remove the bolt, 2 nuts and oil strainer and gasket.