Avalon V6-3.5L (2GR-FE) (2006)
/Page-437010.png)
b. Turn the camshaft timing gear assembly on the RH bank counterclockwise to tighten the chain between banks.
c. Align the mark plate and timing mark as shown in the illustration and install the chain onto the crankshaft timing gear.
HINT: The chain mark plate is yellow.
d. Temporarily tighten the pulley set bolt.
34. INSTALL CHAIN TENSIONER SLIPPER
35. INSTALL CHAIN TENSIONER ASSEMBLY NO.1
a. Move the stopper plate upward to release the lock, and push the plunger deep into the tensioner.
b. Move the stopper plate downward to set the lock, and insert a hexagon wrench into the hole of the stopper plate.
c. Install the chain tensioner No.1 with the 2 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft. lbs.)
