Avalon V6-3.5L (2GR-FE) (2006)
Alignment: Service and Repair
Front Wheel Alignment
NOTICE: w/ VSC: Be sure to perform the steering angle sensor zero point calibration after adjusting the front wheel alignment or replacing VSC
related components.
NOTICE: For Zero Point Calibration information, please refer to: TSB T-SB-0020-8 (3/25/08).
FRONT WHEEL ALIGNMENT ADJUSTMENT
1. INSPECT TIRE
2. MEASURE VEHICLE HEIGHT
XL
TOURING
XLS
LIMITED
Measuring points:
A: Ground clearance of front wheel center
B: Ground clearance of front suspension arm sub-assembly lower No. 2 set bolt head center
C: Ground clearance of strut rod set bolt center
D: Ground clearance of rear wheel center
NOTICE: Before inspecting the wheel alignment, adjust the vehicle height to the specified value.
HINT: Bounce the vehicle at the corners up and down to stabilize the suspension and inspect the vehicle height.