Avalon V6-3.5L (2GR-FE) (2006)
Transmission Position Switch/Sensor: Service and Repair
PARK/NEUTRAL POSITION SWITCH ASSEMBLY (ATM)
REPLACEMENT
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE AIR CLEANER ASSEMBLY
3. REMOVE AIR CLEANER HOSE NO.1
4. REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY
5. REMOVE ENGINE UNDER COVER LH
6. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
a. Remove the nut, washer and control shaft lever.
b. Pry up the lock plate.
c. Remove the lock nut and lock plate.
d. Remove the 2 bolts and pull out the park/neutral position switch.
7. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY