toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Emissions - Stalling/Rough Idle/MIL ON/EVAP DTC's Set|Page 4569 > < Emissions - Stalling/Rough Idle/MIL ON/EVAP DTC's Set|Page 4567
Page 4
background image

2.

Confirm if condition (stalling or rough idle) occurs when Purge VSV is turned "ON" with engine running at idle.

3.

Check for fuel in the EVAP system by disconnecting the vent line from the charcoal canister at the trap filter.

Is liquid fuel present in the EVAP system?

^

If YES - Go to step 4.

^

If NO - This TSB does NOT apply. Continue diagnostics per the Repair Manual.

4.

Remove the fuel tank assembly and the charcoal canister assembly.

Refer to the Technical Information System (TIS), applicable model and model year Repair Manual:

^

2006 model year Avalon Repair Manual:

-

2GR-FE Fuel: Fuel Tank: Removal, Disassembly Reassembly Installation

AND

Emissions - Stalling/Rough Idle/MIL ON/EVAP DTC's Set|Page 4569 > < Emissions - Stalling/Rough Idle/MIL ON/EVAP DTC's Set|Page 4567