Avalon V6-3.5L (2GR-FE) (2006)
Accelerator Pedal: Service and Repair
REPLACEMENT
1. REMOVE ACCELERATOR PEDAL
a. Disconnect the accelerator pedal connector.
b. Remove the 2 nuts and the accelerator pedal assembly.
2. INSTALL ACCELERATOR PEDAL
NOTE:
-
Avoid physical shock to the accelerator pedal assembly.
-
Do not disassemble the accelerator pedal assembly.
a. Install the accelerator pedal assembly with the 2 nuts.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
b. Connect the accelerator pedal connector.