Avalon V6-3.5L (2GR-FE) (2006)
/Page-814002.png)
a. Disconnect the fuel pump tube.
1. Pinch the tab of the retainer to remove the lock claws and pull it down as shown.
2. Pull out the fuel tank main tube.
NOTE:
-
Check that there is no dirt or other foreign objects around the connector before this operation and clean the connector as necessary.
-
Be careful of mud because the quick connector has O-rings which seal the pipe and connector that can be contaminated.
-
Do not use any tools in this operation.
-
Do not bend or twist the nylon tube. Protect the connector by covering it with a plastic bag.
-
When the pipe and connector are stuck, push and pull the connector to release and pull the connector out carefully.
b. Disconnect the fuel tube No.1.
1. Pinch the tube connector and then pull out the fuel tube No.1.
NOTE:
-
Check that there is no dirt or other foreign objects around the connector before this operation and clean the connector as necessary.
-
Be careful of mud because the quick connector has O-rings which seal the pipe and connector that can be contaminated.
