Avalon V6-3.5L (2GR-FE) (2006)
/Page-814007.png)
f.
Connect the fuel tube No.1.
1. Push the fuel tube connector into the pipe until the fuel tube connector makes a "click" sound.
NOTE:
-
Check that there is no damage or foreign objects on the connected part.
-
After connecting, check if the fuel tube connector and the pipe are securely connected by trying to pull them apart.
g. Connect the fuel pump tube.
1. Push in the fuel tube connector to the pipe and push up the retainer so that the claws engage.
NOTE:
-
Check that there is no damage or foreign objects on the connected part.
-
After connecting, check if the fuel tube connector and the pipe are securely connected by trying to pull them apart.
23. INSTALL FUEL TANK PROTECTOR LOWER CENTER
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
24. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.3
