Avalon V6-3.5L (2GR-FE) (2006)
Inspect the entire length of webbing for damage and replace the assembly if needed. Be careful NOT to damage the webbing during repair.
2. Install the NEW tongue plate stopper
A. Install a NEW tongue plate stopper in the hole of the webbing.
NOTE: Be sure to install the stopper in the correct direction as shown in the illustration.
B. Pinch the tongue plate stopper into the webbing using an adjustable wrench, and turn and push the adjustment screw by hand.
HINT: Press the adjustment screw in order to position the male and female parts of the tongue plate stopper parallel to each other as shown in
illustration.
CAUTION: DO NOT use pliers. They may damage the webbing.