Avalon V6-3.5L (2GR-FE) (2006)
d. Intake camshaft (Bank 2).
1. Disconnect the VVT sensor connector.
2. Remove the bolt and the VVT sensor.
3. INSTALL VVT SENSOR
a. Intake camshaft (Bank 2).
1. Install the sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
2. Connect the VVT sensor connector.
b. Exhaust camshaft (Bank 2).
1. Install the sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
2. Connect the VVT sensor connector.