Avalon V6-3.5L (2GR-FE) (2006)
9. INSPECT GENERATOR ROTOR ASSEMBLY
a. Check that the generator rotor bearing is not rough or worn.
If necessary, replace the generator rotor.
b. Check the generator rotor for an open circuit.
1. Using an ohmmeter, measure the resistance between the slip rings.
Standard resistance: 2.3 to 2.7 Ohms at 20°C (68°F)
If the result is not as specified, replace the generator rotor assembly.
c. Check the generator rotor for a short circuit.
1. Using an ohmmeter, measure the resistance between the each slip ring and rotor.
Standard resistance: 1 MOhm or higher
If the result is not as specified, replace the generator rotor assembly.