Avalon V6-3.5L (2GR-FE) (2006)
/Page-1084003.png)
5.
Remove the Junction Block and disconnect the 6 connectors.
6.
Install the NEW Junction Block. Installation is the reverse order of removal.
7.
Reconnect the negative (-) battery terminal.
8.
Verify normal operation of the Daytime Running Lights.
9.
Re-initialize affected power Systems. Refer to the following TSBs:
^
2005 model year - TSB No. PD008-05 "Power System Initialization During PDS".
^
2006 model year - TSB No. PD014-06 "Power System Initialization During PDS".
