Avalon V6-3.5L (2GR-FE) (2006)
a. Install the drive housing starter bearing cover to the starter commutator end frame.
14. INSTALL STARTER ARMATURE PLATE
a. Align the claw of the armature plate with the groove inside the starter yoke, and install the starter armature plate.
15. INSTALL STARTER COMMUTATOR END FRAME ASSEMBLY
a. Align the starter commutator end frame rubber with the groove of the starter yoke.
b. Install the starter commutator end frame to the starter yoke.
NOTE: The magnet of the starter yoke may attract the starter armature when the starter commutator end frame is installed, causing the magnet
to break.
16. INSTALL STARTER YOKE ASSEMBLY
a. Align the claw of the starter yoke with the groove inside the motor terminal starter kit.
b. Install the starter yoke with the 2 through bolts.