Avalon V6-3.5L (2GR-FE) (2006)
e. Fully push or pull the front axle hub in the direction of the required adjustment.
Tighten the nuts.
Torque: 210 Nm (2,140 kgf-cm, 155 ft. lbs.)
NOTICE: Keep the bolts from rotating and torque the nuts when installing the nuts.
g. Install the front wheel.
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
h. Check the camber.
If the measured value is not within the specification, calculate the required adjustment amount using the formula below.
(Camber adjustment amount) = Specified range medium - measured value
Check installed bolts combination. Select appropriate bolts from the table to adjust the camber to within the specified range.