Avalon V6-3.5L (2GR-FE) (2006)
13. REMOVE W/PULLEY SHAFT SUB-ASSEMBLY
a. Using 2 screwdrivers, remove the snap ring from the w/ pulley shaft sub-assembly.
b. Remove the w/ pulley shaft sub-assembly.
14. REMOVE VANE PUMP ROTOR
a. Remove the 10 vane pump plates.
b. Remove the vane pump rotor.
15. REMOVE VANE PUMP CAM RING
16. REMOVE VANE PUMP SIDE PLATE FRONT
a. Remove the vane pump side plate front from the vane pump housing front.
b. Remove the O-ring from the vane pump side plate front.
c. Remove the O-ring from the vane pump housing front.
17. REMOVE VANE PUMP HOUSING OIL SEAL
a. Using a screwdriver, remove the vane pump housing oil seal.
NOTICE: Be careful not to damage the vane pump housing front.