Avalon V6-3.5L (2GR-FE) (2006)
/Page-1177011.png)
a. Install the vane pump assembly with the 2 bolts.
Torque: 43 Nm (439 kgf-cm, 32 ft. lbs.)
b. Connect the connector to the power steering oil pressure switch.
35. CONNECT PRESSURE FEED TUBE ASSEMBLY
a. Install a new gasket to the pressure feed tube assembly.
b. Connect the pressure feed tube assembly to the vane pump assembly with the union bolt
Torque: 52 Nm (525 kgf-cm, 38 ft. lbs.)
HINT: Make sure that the stopper of the pressure feed tube assembly contacts the vane pump assembly as shown in the illustration, then
tighten the union bolt.
c. Install the pressure feed tube clamp with the bolt.
Torque: 9.8 Nm (100 kgf-cm, 87 inch lbs.)
