Avalon V6-3.5L (2GR-FE) (2006)
10. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY
a. Support the rear suspension member with a jack.
b. Remove the 4 nuts, 2 bolts and 4 retainers from the rear suspension member.
c. Lower the rear suspension member.
11. REMOVE REAR SUSPENSION ARM ASSEMBLY NO.1 LH
a. Remove the bolt and rear suspension arm No.1.
12. INSTALL REAR SUSPENSION ARM ASSEMBLY NO.1 LH
a. Install the rear suspension arm No.1 with the bolt, and temporarily tighten the bolt.
HINT:
-
Install the rear suspension arm No.1 so that the bracket leans toward the front side of the vehicle, as shown in the illustration.
-
Ensure that the paint mark faces the rear side of the vehicle.