Avalon V6-3.5L (2GR-FE) (2006)
8. SEPARATE REAR SUSPENSION ARM ASSEMBLY NO.1 LH
a. Remove the bolt and nut, separate the rear suspension arm assembly No.1 LH (rear axle carrier side) from the rear axle carrier sub-assembly.
HINT: When removing the bolt, keep the nut from rotating.
9. REMOVE REAR AXLE CARRIER SUB-ASSEMBLY LH
a. Remove the 2 bolts and 2 nuts, and remove the rear axle carrier sub-assembly LH from the shock absorber.
10. INSTALL REAR AXLE CARRIER SUB-ASSEMBLY LH
a. Install the rear axle carrier sub-assembly LH with the 2 bolts and 2 nuts to the shock absorber.
Torque: 255 Nm (2,600 kgf-cm, 188 ft. lbs.)
11. TEMPORARILY TIGHTEN REAR SUSPENSION ARM ASSEMBLY NO.1 LH
a. Temporarily tighten the rear suspension arm assembly No.1 LH with the bolt and nut.
HINT: Insert the bolt from the rear side of the vehicle and temporarily tighten the bolt.