Avalon V6-3.5L (2GR-FE) (2006)
f.
Install the front coil spring seat upper LH to the shock absorber assembly front LH with the mark facing the outside of the vehicle.
g. Install a new front suspension support bearing LH as shown in the illustration.
h. Install the front suspension support sub-assembly LH with the mark facing the outside of the vehicle.
i.
Temporarily tighten a new lock nut.
j.
Remove the SST slowly in order to release the coil spring.
SST 09727-30021 (09727-00010, 09727-00021)
8. INSTALL FRONT SHOCK ABSORBER WITH COIL SPRING
a. Install the front shock absorber with coil spring.
b. Install the 3 nuts to the upper side of the front shock absorber with coil spring.
Torque: 85 Nm (867 kgf-cm, 63 ft. lbs.)
NOTICE: Be careful not to drop the collar in the case that there is front suspension upper brace center.