Avalon V6-3.5L (2GR-FE) (2006)
/Page-911001.png)
Shift Cable: Service and Repair
TRANSMISSION CONTROL CABLE ASSEMBLY (ATM)
REPLACEMENT
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
3. REMOVE POSITION INDICATOR HOUSING ASSEMBLY
4. REMOVE CONSOLE BOX UPPER
5. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER
6. REMOVE CONSOLE BOX ASSEMBLY
7. REMOVE CONSOLE BOX FRONT
8. REMOVE AIR BAG SENSOR ASSEMBLY CENTER
9. REMOVE AIR CLEANER ASSEMBLY
10. REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY
11. REMOVE ENGINE UNDER COVER LH
12. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY
a. Remove the 2 bolts and disconnect the shift cable grommet retainer No.2.
b. Remove the nut from the control shaft lever.
c. Disconnect the control cable from the control shaft lever.
d. Remove the clip and disconnect the control cable from the control cable bracket.
