Avalon V6-3.5L (2GR-FE) (2006)
14. REMOVE FRONT DRIVE INNER SHAFT OUTER LH SHAFT SNAP RING
a. Using a screwdriver, remove the front drive inner shaft outer LH shaft snap ring.
15. REMOVE FRONT AXLE INBOARD JOINT BOOT CLAMP
a. Using pliers, remove the inboard joint boot LH No.2 clamp and inboard joint boot LH clamp, as shown in the illustration.
16. SEPARATE FR AXLE INBOARD JOINT BOOT
a. Separate the inboard joint boot from the inboard joint assembly.
17. REMOVE FRONT DRIVE INBOARD JOINT ASSEMBLY LH
a. Put matchmarks on the inboard joint assembly and outboard joint shaft.
NOTICE: Do not use a punch for the marks.
b. Remove the inboard joint assembly from the outboard joint shaft.
c. Using a snap ring expander, remove the shaft snap ring.