Avalon V6-3.5L (2GR-FE) (2006)
HINT: Even if all the adhesive has been removed, clean the vehicle body.
13. INSTALL BACK WINDOW GLASS STOPPER NO.2
a. Coat the installation part of the stopper with Primer G.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Dispose of any excess Primer G.
-
Do not apply too much Primer G.
b. Install 2 new stoppers onto the glass as shown in the illustration.
14. INSTALL BACK WINDOW GLASS STOPPER NO.1
a. Install 2 new stoppers to the vehicle body as shown in the illustration.
15. INSTALL BACK WINDOW MOULDING OUTSIDE UPPER
a. Using a brush or sponge, coat the edge of the glass and the contact surface with Primer G.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Dispose of any excess Primer G.
-
Do not apply too much Primer G.