Avalon V6-3.5L (2GR-FE) (2006)
/Page-1785007.png)
d. Apply adhesive.
Adhesive: Part No. 08850-00801 or equivalent
1. Cut off the tip of the cartridge nozzle as shown in the illustration.
HINT: After cutting off the tip, use adhesive within the time described in the table.
2. Load a sealer gun with the cartridge.
3. Coat the glass with adhesive as shown in the illustration.
e. Install the glass.
1. Using a suction cup, position the glass so that the reference marks are aligned. Press it in gently along the rim.
NOTE:
