toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Sunroof / Moonroof Limit Switch > < Sliding Roof Control Relay|Page 7487
Page 1
background image

Sunroof / Moonroof Circuit Breaker: Testing and Inspection

INSPECT CIRCUIT BREAKER OPERATION

1. With the sliding roof in the fully opened position, hold the sliding roof switch in OPEN position and check that there is a circuit breaker operation

noise within 10 to 60 seconds.

2. With the sliding roof in the fully opened position, hold the sliding roof switch in CLOSE position and check that the sliding roof begins to close

within 60 seconds.

If operation is not as specified, replace the motor.

Sunroof / Moonroof Limit Switch > < Sliding Roof Control Relay|Page 7487