Avalon XL V6-3.0L (1MZ-FE) (1997)
/Page-1840001.png)
Air Door Actuator / Motor: Testing and Inspection
Air Inlet Servomotor
INSPECT AIR INLET SERVOMOTOR OPERATION
1. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, then check that the arm turns to the "FRESH"
side smoothly.
2. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3, check that the arm rotates to the "RECIRC" side
smoothly.
If operation is not as specified, replace the servomotor.
