Avalon XL V6-3.0L (1MZ-FE) (1997)
/Page-1859001.png)
Blower Motor Resistor: Service and Repair
Manual A/C
BLOWER RESISTOR REMOVAL (Manual A/C)
1. REMOVE LOWER FINISH PLATE
Blower Resistor (Manual A/C)
2. REMOVE BLOWER RESISTOR
a.
Disconnect the connector from blower resistor.
b.
Remove the 2 screws and blower resistor.
BLOWER RESISTOR INSTALLATION
Installation is in the reverse order of removal.
