Avalon XL V6-3.0L (1MZ-FE) (1997)
/Page-1870003.png)
NOTE: Be careful not to damage the pulley when tapping on the rotor.
3. REMOVE STATOR
a. Disconnect the stator lead wire from the compressor housing.
b. Using SST, remove the snap ring.
SST 07114-84020
ASSEMBLY NOTE: The snap ring should be installed so that Its beveled side faces up.
c. Remove the stator.
MAGNETIC CLUTCH ASSEMBLY
Assembly is in the reverse order of disassembly.
Check clearance of Magnetic Clutch.
