toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Drive Belt > < Timing Belt Removal|Page 1690
Page 8
background image

18. Connect ground strap connectors.
19. Connect engine coolant reservoir hose to water outlet.
20. Install Power Steering (PS) pump drive belt.
21. Install generator drive belt.

Tighten the pivot bolt and nut.
Torque (Nut): 28 Nm (21 ft. lbs.) 

22. Install RH fender apron seal.
23. Install RH front wheel.
24. Vehicle road test.

Check for abnormal noise, shock, slippage, correct shift points and smoothly operation.

Drive Belt > < Timing Belt Removal|Page 1690