Avalon XL V6-3.0L (1MZ-FE) (1997)
/Page-776001.png)
Camshaft Position Sensor: Service and Repair
CAMSHAFT POSITION SENSOR REMOVAL
REMOVE CAMSHAFT POSITION SENSOR
(a) Disconnect the camshaft position sensor connector.
(b) Remove the 2 bolts and camshaft position sensor.
Torque: 8 N.m (80 kgf.cm, 69 in.lbf)
CAMSHAFT POSITION SENSOR
INSTALLATION
INSTALLATION HINT: Installation is in the reverse order of removal.
