Avalon XL V6-3.0L (1MZ-FE) (1997)
/Page-791001.png)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION SENSOR REMOVAL
1. REMOVE RH FENDER APRON SEAL
2. REMOVE CRANKSHAFT POSITION SENSOR
(a) Remove the bolt and disconnect the crankshaft position sensor.
Torque: 8 N.m (80 kgf.cm, 69 in..lbf)
(b) Disconnect the crankshaft position sensor connector.
CRANKSHAFT POSITION SENSOR
INSTALLATION
INSTALLATION HINT: Installation is in the reverse order of removal.
