Avalon XL V6-3.0L (1MZ-FE) (1997)
Transmission Speed Sensor: Service and Repair
REPLACEMENT
1. Remove air cleaner assembly.
2. Disconnect direct clutch speed sensor connector.
3. Remove direct clutch speed sensor, as follows:
a. Remove the bolt and direct clutch speed sensor.
b. Remove the O-ring from the direct clutch speed sensor.
4. Install direct clutch speed sensor, as follows:
a. Coat a new O-ring with ATF and install it to the direct clutch speed sensor.
b. Install the direct clutch speed sensor and tighten the bolt to 5.4 Nm (48 inch lbs.).
5. Install air cleaner.