Avalon XL V6-3.0L (1MZ-FE) (1997)
Wheel Bearing: Service and Repair
Rear
NOTE: The wheel bearing is a non-serviceable part of the rear axle hub. If out of specifications replace as an assembly.
PROCEDURE
1. Remove rear wheel
[Torque: 103 Nm (76 ft. lbs.)]
2. Remove brake caliper and disc.
a. Remove the brake caliper and disc.
[Torque: 47 Nm (34 ft. lbs.)]
b. Support the brake caliper securely.
3. Check bearing backlash and axle hub deviation.
a. Using a dial indicator near the center of the axle hub and check the backlash in the bearing shaft direction.
Maximum: 0.05 mm (0.0020 inch).
NOTE: If the backlash exceeds the maximum, replace the axle hub with the bearing.