Avalon XLS V6-3.0L (1MZ-FE) (1998)
/Page-546001.png)
Drive Belt: Service and Repair
A/C
REMOVAL
REMOVE DRIVE BELT
a. Loosen the pivot bolt and adjusting lock nut.
Torque:
Pivot bolt: 56 N.m (570 kgf.cm, 41 ft.lbf)
Adjusting lock nut: 18 N.m (185 kgf.cm, 13 ft.lbf)
b. Loosen the drive belt tension by adjusting bolt and remove the drive belt.
INSTALLATION
Installation is in the reverse order of removal.
AFTER INSTALLATION, CHECK DRIVE BELT'S INSTALLATION CONDITION
