Avalon XLS V6-3.0L (1MZ-FE) (1998)
/Page-585003.png)
4. Remove PS pump drive belt.
Loosen the 2 bolts, and remove tine drive belt.
5. Disconnect engine coolant reservoir hose from water outlet.
6. Disconnect ground strap connector (from water outlet to body).
7. Remove RH engine mounting stay, engine moving control rod and No.2 RH engine mounting bracket.
8. Remove No.2 generator bracket.
a. Loosen the generator pivot bolt.
b. Remove the nut and bracket.
9. Remove crankshaft pulley.
a. Using Special Service Tool (SST) 09213 - 54015 (91651 - 60855), 09330 - 00021 or equivalent, remove the pulley bolt.
b. Using SST 09950 - 50010 (09951 - 05010, 09952 - 05010, 09953 - 05010, 09953 - 05020, 09954 - 05020), remove the pulley.
