Avalon XLS V6-3.0L (1MZ-FE) (1998)
Wheel Fastener: Service and Repair
Front
REPLACEMENT
1. Remove front wheel.
2. Remove brake caliper and disc.
a. Remove the 2 bolts, brake caliper and disc.
b. Support the brake caliper securely.
3. Remove hub bolt.
Using Special Service Tool (SST) 09628 - 10011 remove the hub bolt.
4. Install hub bolt.
Install a washer and nut to the hub bolt as shown in the illustration, and install the hub bolt by torquing the nut.
5. Install disc and brake caliper.
Install the disc and brake caliper with the 2 bolts.
Torque: 107 Nm (79 ft. lbs.)
6. Install front wheel.
Torque: 103 Nm (76 ft. lbs.)