Avalon XLS V6-3.0L (1MZ-FE) (1998)
/Page-1011001.png)
Crankshaft Position Sensor: Service and Repair
REMOVAL
1. REMOVE RH FENDER APRON SEAL
2. REMOVE CRANKSHAFT POSITION SENSOR
(a) Remove the bolt and disconnect the crankshaft position sensor.
Torque: 8 N.m (80 kgf-cm, 69 in-lbf)
(b) Disconnect the crankshaft position sensor connector.
INSTALLATION
Installation is in the reverse order of removal.
