Avalon XLS V6-3.0L (1MZ-FE) (1998)
Side Air Bag: Testing and Inspection
INSPECTION
1. VEHICLES NOT INVOLVED IN COLLISION
a. Do a diagnostic system check.
b. Do a visual check which includes the following items with the side airbag assembly installed in the vehicle.
Check that there are no cuts or the frayed on seams and seatback cover.
2. VEHICLE INVOLVED IN A COLLISION AND AIRBAG IS NOT DEPLOYED
a. Do a diagnostic system check.
b. Do a visual check which includes the following items with the seatback frame assembly removed from the vehicle.
-
Check cuts and cracks, or marked discoloration of the side airbag assembly.
-
Check cuts and cracks in wire harnesses, and chipping in connectors.
CAUTION: For removal and installation of the seatback frame assembly. Refer to Air Bag/Service and Repair and be sure to follow the correct
procedure.
3. VEHICLE INVOLVED IN A COLLISION AND AIRBAG IS DEPLOYED
a. Do a diagnostic system check.
b. Do a visual check which includes the following items with the seatback frame assembly removed from the vehicle.
-
Check the side airbag installation part of the seat frame.
-
Check the damage to the connector and wire harness.
HINT: If the seat frame is deformed, never repair it. Always replace it with new one
REPLACEMENT REQUIREMENTS
In the above cases, replace the seatback assembly or seatback cover.