Avalon XLS V6-3.0L (1MZ-FE) (1998)
/Page-2015004.png)
d. Connect the side airbag connector.
e. Install the 2 hooks as shown in the illustration.
3. INSTALL FRONT SEATBACK BOARD
Install front seatback board to the front seat.
4. INSTALL FRONT SEAT
a. Mount the seat to the vehicle.
b. Connect the power seat connector and side airbag connector.
c. Install the outer bolt and inner bolt on the front side after sliding the seat to the rearmost position.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
d. Tighten the bolts on the rear side temporarily, from the bolt on the inner side tighten them completely.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
