Avalon XLS V6-3.0L (1MZ-FE) (1998)
/Page-2029001.png)
Air Bag Control Module: Testing and Inspection
Airbag Sensor Assembly
INSPECTION
1. VEHICLE NOT INVOLVED IN COLLISION
Do a diagnostic system check.
2. VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
Do a diagnostic system check.
3. VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED
Replace the airbag sensor assembly.
REPLACEMENT REQUIREMENT
In the following cases, replace the airbag sensor assembly.
^
If the SRS has been deployed in a collision.
^
If the airbag sensor assembly has been found to be faulty in troubleshooting.
^
If the airbag sensor assembly has been dropped.
