Avalon XLS V6-3.0L (1MZ-FE) (1998)
/Page-1871001.png)
Stabilizer Link: Service and Repair
Front
1. Remove left and right stabilizer bar links, by removing the 4 nuts and 2 links.
[Torque: 39 Nm (29 ft. lbs.)]
NOTE: If the ball joint turns together with the nut, use a 5 mm hexagon wrench to hold the stud.
2. Inspect as necessary.
3. Reverse Step 1 to install, noting the torque specifications in brackets [ ].
