Avalon XLS V6-3.0L (1MZ-FE) (1998)
window to the fully closed position.
c. Continue to apply voltage, check that there is a PTC operation noise within approximately 4 to 90 seconds.
d. Reverse the polarity, check that the window begins to descend within approximately 60 seconds.
If operation is not as specified, replace the motor.
Passenger's door:
INSPECT PTC OPERATION
a. Disconnect the connector from the power window switch.
b. Connect the positive (+) lead from the battery to terminal 5 and the negative (-) lead to terminal 1 on the wire harness side connector, and raise the
window to the fully closed position.
c. Continue to apply voltage, check that there is a PTC operation noise within approximately 4 to 90 seconds.
d. Reverse the polarity, check that the window begins to descend within approximately 60 seconds.
If operation is not as specified, replace the motor.